Turbine Flow Meters

Electronet series FL-100 are Two Wire Turbine Flow Transmitters specially used for various industrial applications. The flowing media engages a vaned rotor causing it to rotate at an angular velocity proportional to flow rate. The pick-up coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal. Summation of the pulsating electrical signal is directly related to the total flow.

Turbine flow meters are inherently sensitive to Reynolds number. They will not be linear at Reynolds numbers nearing or in the laminar region. Therefore, they should be carefully used in the case of fluids with a broad temperature and viscosity range such as some oils. It is not a problem at constant conditions, but is often hard to achieve practically.

Specification

• Application Media: Liquids (Clear)
• Display: 8 X 1LCD Display
• Brand: ELECTRONET
• Model: FL-100
• Power Supply: 24 V DC
• Accuracy: +/- 1% of F. S. at the rate Velocity less than 0.5 m/s
• Mounting: In-Line Horizontal / Vertical 

Electronet series FL-106 are Battery Operated Turbine Flow Transmitter specially used for various industrial applications.

The flowing media engages a vaned rotor causing it to rotate at an angular velocity proportional to flow rate. The pick-up coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal. Summation of the pulsating electrical signal is directly related to the total flow.

The frequency is linearly proportional to flow rate which is converted to electrical signal 4 - 20 mA.

Specification 

• Application Media: Liquids (Clear)
• Display: 4 Digit for Flow Rate & 8 Digit for Totalised Flow
• Brand: ELECTRONET
• Model: FL 106
• Power Supply: Battery Operated (2 Nos 3.6V DC) / Solar Powered
• Accuracy: +/- 1% of F. S. at the rate Velocity less than 0.5 m/s
• Remote Electronics Cable: 15 Meters Max.
• Battery Life: 2 to 10 years depending on sampling time 

Electronet series FL-204 are Four Wire Turbine Flow Transmitter specially used for various industrial applications.

The flowing media engages a vaned rotor causing it to rotate at an angular velocity proportional to flow rate. The pick-up coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal.

Summation of the pulsating electrical signal is directly related to the total flow. The frequency is linearly proportional to flow rate which is converted to electrical signal 4 - 20 mA.

Specification 

• Display: 4 Digit, 0.3 inch Red LED for Flow Rate & 8 Digit, 0.3 inch Red LED for Totalised Flow
• Brand: ELECTRONET
• Model: FL-204
• Power Supply: 1) 24 V DC 2) 230 V AC, 50 Hz +/- 10% (External Converter)
• Accuracy: +/- 1% of F. S. at the rate Velocity less than 0.5 m/s
• Pick off Type: Magnetic Sensor